The best way to audit your COI management process is to pull a sample of current certificates, check each one against its contract, and trace how your team requests, reviews and renews them, noting every step that depends on one person.

Your team probably already collects certificates of insurance (COIs) from every partner, but you might not know if anyone checks them against each contract or keeps track of them after they're filed. Plenty of teams feel the same way when nobody has taken a good look at the process as a whole.

You can clear up most of that uncertainty when you audit your COI management process. That's how you'll see what your team checks on each certificate, where people lose track of certificates, which fixes to make first, and how to keep improving between audits.

Key Takeaways:

  • An audit looks at the whole process, not one certificate.
  • Start with your most-used partners and largest contracts.
  • Fix coverage problems first: expired policies, short limits, missing endorsements.
  • Any step that depends on one person’s memory or inbox is a gap.

What Does It Mean to Audit Your COI Management Process?

Auditing your COI management process is when you review how your team collects certificates, checks them, and tracks them over time. You take a step back and look at the full system, like who logs a new certificate and who requests the updated one at renewal.

Focusing on the system is what makes it different from a one-time document check. A spot check tells you if one partner's certificate matches their contract right now. When you audit, you look at how your team handles every certificate over time, so you'll know if someone would notice when any partner's policy expires or their limits change at renewal.

You'll want to run a COI compliance audit from time to time to find out what your team is doing well and what needs attention. Most teams find a few weak spots on the first pass. Once you know where they are, you can decide which ones to tackle first and start improving certificate of insurance compliance for every third-party partner you work with.

Why Does Auditing Your COI Tracking Process Matter?

Auditing your COI tracking process lets you find out where your team loses time and which steps it handles inconsistently, like tracking renewal dates or recording what each contract requires. Many teams don't realize how much time they spend following up on missing paperwork until someone looks at the full process.

Two people on your team could request the same certificate without knowing the other already asked. You might also find out a partner's coverage expired months ago because nobody set a reminder for the renewal date. When one person keeps every partner's requirements in their head, everyone else has to dig through old emails whenever that person is out of the office.

Doing an audit also lets you check who reviews endorsements when a COI comes in. Endorsements are written changes to a policy that add protections your contract requires.. If nobody is in charge of that step, your team might learn about a missing endorsement in the middle of a project when it's much harder to resolve.

Once you audit on a regular schedule, you won't have to send as many follow-up emails and will have an easier time trusting that what's on file matches each contract. You can make these audits a standard part of how your team handles third-party insurance compliance so people spend less time hunting for documents and more time keeping projects on schedule.

How Do You Audit Your COI Management Process Step by Step?

You can audit your COI management process in three steps that your team can repeat each year as its standard insurance compliance audit process. Work through them in this order:

  1. Pull a sample of current certificates: Start with the third-party partners your team works with most often or the ones tied to your largest contracts. You can expand the review after your team fixes the issues from its first round.
  2. Check each certificate against its contract: Pull up each partner's contract and note the coverage limits and endorsements it requires. Then, confirm the partner's certificate shows that same coverage before you mark it as accurate.
  3. Map where your team gets stuck: Trace how your team receives each certificate in your sample, checks it, and follows up before it expires. Note every point where your team has to wait for one person before anyone can take the next step.

What Should You Check When Reviewing COI Accuracy?

You review COI accuracy by comparing each certificate to the insurance requirements in its contract. Your team already knows a partner has some coverage once you have a certificate on file, so in this step you check if that coverage matches the contract. Look at these five details on every certificate when you run your own insurance certificate verification:

  • Coverage limits: Confirm the limits for General Liability, Auto Liability, Umbrella/Excess and Employers’ Liability match or exceed the contract, and that Workers’ Compensation is in place.
  • Expiration dates: Note any policy that ends before the partner finishes work on your project.
  • Additional insured status: Look for language showing the partner's policy covers your company too.
  • Waiver of subrogation: See if the partner's insurer agreed not to seek repayment from your company for claims it pays.
  • Primary and non-contributory: If your contract requires it, check that the partner’s policy pays before yours does.

Keep in mind that your company can appear as an additional insured on a certificate even if the partner's policy doesn't have the endorsement that adds you. If your contract requires that status, ask the partner's broker for a copy of the endorsement too.

After the review, put anything that affects if your coverage applies at the top of your list, like an expired policy, limits below the contract, or a missing endorsement. You can save formatting quirks and outdated broker contact details for later because they don't change the coverage.

How Do You Spot Gaps in Your COI Tracking System?

You can identify gaps in your COI tracking system by following how your team handles certificates over several months and noting where the process depends on one person remembering what to do.

Start with renewals and look at how your team finds out that a policy is about to expire. If your system doesn't send reminders ahead of time, then someone on your team has to manually set a reminder or track dates on a spreadsheet.

Then, check if your team keeps one central record of the certificates you've requested and haven't received yet. If only one coordinator has access to those requests in their sent folder, the rest of the team has no way to follow up when that coordinator moves to another project.

Also look at what your team does when a partner falls out of compliance. If one person adds a note to a spreadsheet and another sends a quick email, nobody can tell at a glance which partners aren't cleared to work yet.

What Are the Warning Signs Your COI Process Needs to Change?

You should change your COI process if your team can't tell which third-party partners are covered without asking around or searching old messages. Project managers usually notice the problem during a busy week when they need a quick answer about a partner's insurance coverage and then have to spend a full morning looking for it.

These are the most common signs it's time to update your COI process:

  • Tracking by memory or inbox search: Your team has to remember which partners sent certificates or search through their email for the last attachment someone forwarded. This could work when you work with a handful of partners, but every new project gives your team more information to remember.
  • Surprise expirations: Someone on your team only realizes a partner's certificate has expired when they happen to open the file, often right before that partner starts a new job. You then end up requesting updated certificates at the last minute because nobody kept a running list of upcoming expiration dates.
  • One person has all the answers: Your team can only confirm a partner is in compliance when one coordinator is free to check. When that coordinator takes time off, project managers have to wait until they're back to ask them any questions.

If you noticed any of these signs, compare them with the notes from your audit. Your team probably searches inboxes because nobody saves new certificates in one shared place. If expirations keep catching you off guard, it's usually because nobody has taken charge of following up before renewal dates. Project managers likely depend on one coordinator because only that person writes down which certificates they've checked.

Teams that follow COI management best practices keep every certificate in one central record that anyone on the team can check. Their software flags renewals weeks before a policy expires and reminds partners to send an updated certificate. Compare your current setup to that standard and you'll know exactly where you stand. If you don’t have a written standard to audit against, start with [what to include in a COI compliance policy].

How Can AI-Powered Compliance Tools Strengthen Your COI Audit Results?

AI-powered compliance tools strengthen your audit results by taking care of the day-to-day tracking your audit showed you need, so your team doesn't have to track every renewal date and outstanding request by hand. Right after your first audit, your team will likely have a long list of changes to make and no clear way to keep up with them by hand once projects pick up again.

An AI-powered compliance platform like illumend, from myCOI, keeps track of the certificates, renewal dates, missing endorsements, and open requests your team flagged during the audit. The platform empowers your team to check third-party partner's status without waiting on the coordinator because it stores every certificate and update in one shared record. It’s built by the team behind myCOI, who’ve reviewed more than 45 million insurance documents over 16 years.

Lumie, the AI expert for insurance compliance, reads each certificate and the endorsements behind it against your contract requirements and points out what’s missing. Lumie makes the call. Your team signs off. Lumie also reaches out to partners and their brokers ahead of renewal and follows up until any gap closes.

Once your team uses illumend as its COI tracking software, your internal staff, third-party partners, and their brokers will all work from the same information in one connected workflow. You'll also get proactive alerts before a certificate expires, so your team can request an updated one with time to spare. When your next audit comes around, you'll start from a cleaner baseline because your team will have kept up with certificates all year. Ready to start your next audit from a cleaner baseline? Schedule a demo to see how illumend keeps every certificate current between audits.

‍

Blog & Insights

Moving Beyond the Outdated Insurance Compliance Model
Previous articles
What Should Be Included in a COI Compliance Policy?

What Should Be Included in a COI Compliance Policy?

Every policy should cover three basics: who it applies to, how requirements are set, and how compliance gets confirmed before work begins.
Admin 101
From Compliance Fatigue to Strategic Advantage: How AI is Transforming Third-Party Insurance Compliance

From Compliance Fatigue to Strategic Advantage: How AI is Transforming Third-Party Insurance Compliance

Third-party insurance compliance takes hours that AI can give back by handling routine verification. Learn how AI improves visibility and partner trust.
Insurance Knowledge
Educational
Perspectives
Subcontractor Default Insurance: Everything You Need To Know

Subcontractor Default Insurance: Everything You Need To Know

Subcontractor default insurance protects general contractors and owners from the financial losses a default causes. Learn how SDI works and what it covers.
Insurance Knowledge
Educational
Guides & How-Tos
How Long Should You Keep Certificates of Insurance?

How Long Should You Keep Certificates of Insurance?

Plan to keep certificates of insurance for at least three years past your state's statute of repose, or keep them permanently.
Admin 101
COI Tracking vs. COI Management: What's the Difference?

COI Tracking vs. COI Management: What's the Difference?

This article breaks down the difference between COI tracking vs. COI management, helps you decide which approach fits your organization, and what solutions are available.
Admin 101
How to Track Historical COIs and Prove Coverage on a Past Date

How to Track Historical COIs and Prove Coverage on a Past Date

Learn how to track historical COIs, verify past insurance coverage, and maintain accurate records to simplify audits and reduce compliance risks.
Admin Mastery
You don't have to understand insurance to be good at compliance.
With Lumie, compliance is covered. So is everyone on your project.
Get started